SKAPS M706 woven geotextile fabrics are woven polypropylene materials offering optimum performance when used in reinforcement, stabilization, and drainage applications. Produced from first-quality raw materials, they provide the perfect balance of strength and separation in styles capable of functioning exceptionally well in a wide range of performance requirements. SKAPS M706 resists ultraviolet resistance, rotting, and biological degradation and it is chemically inert to any natural bases or acids.
| Property | Method | English (MARV2) | Metric (MARV2) |
| Grab Tensile | ASTM D 4632 | 370 x 250 lbs | 1.65 x 1.11 kN |
| Grab Elongation | ASTM D 4632 | 16% x 15% | 16% x 15% |
| Trapezoidal Tear | ASTM D 4533 | 100 x 60 lbs | 0.445 x 0.267 kN |
| CBR Puncture Resistance | ASTM D 6241 | 950 lbs | 4.28 kN |
| Water Flow3 | ASTM D 4491 | 18 gpm/sf | 733 I/min/sm |
| Permittivity3 | ASTM D 4491 | 0.28 Sec-1 | 0.28 Sec-1 |
| AOS3 | ASTM D 4751 | 70 US Sieve | 0.212 mm |
| UV Resistance | ASTM D 4355 | 90/500 %/hrs | 90/500 %/hrs |
| Roll Dimensions (W X L) | Area Per Roll |
| 12 x 300 ft. | 400 sq. yards |
| 3.66 m x 91 m | 346 sq. meters |
Notes:
1. The property values listed above are subject to change without notice.
2. Minimum Average Roll Values (MARV) is calculated as the average minus two standard deviations.
Statistically, it yields approximately 97.5% degree of confidence that any samples taken from quality assurance testing will meet or exceed the values described above.
3. At time of manufacturing. Handling may change these properties.