Skaps Industries | Geosynthetic Products & Technical Textiles

SKAPS TRANSNET 220 – GEOCOMPOSITE – ENGLISH UNITS

TN-160

SKAPS TRANSNETTM Geocomposite consists of SKAPS Geonet made from HDPE resin with nonwoven polypropylene geotextile fabric heat bonded on one side or both sides of the Geonet.

PROPERTYTEST METHODUNITVALUEVALUEQUALIFIER
GEONET
ThicknessASTM D 5199mil200200MAV(3)
Carbon BlackASTM D 4218%2.002.00MAV
Tensile StrengthASTM D 7179lb/in4545MAV
Melt FlowASTM D 1238(2)g/10 min1.001.00Maximum
DensityASTM D 1505g/cm30.940.94MAV
Transmissivity(1)ASTM D 4716gal/min/ft (m2/sec)9.67 (2.0 x 10-3)9.67 (2.0 x 10-3)MAV
GEOCOMPOSITE6 oz/yd28 oz/yd2
Ply AdhesionASTM D 7005lb/in1.001.00MAV
Transmissivity(1) DSASTM D 4716gal/min/ft (m2/sec)TN 220-2-6TN 220-2-8
0.48 (1.0 X 10-4)0.48 (1.0 X 10-4)MAV
Transmissivity(1) SSASTM D 4716gal/min/ft (m2/sec)TN 220-1-6TN 220-1-8
4.83 (1.0 X 10-3)4.83 (1.0 X 10-3)MAV
GEOTEXTILE
Fabric WeightASTM D 5261oz/yd268MARV(4)
Grab TensileASTM D 4632lb160225MARV
Grab ElongationASTM D 4632%5050MARV
Trapezoid TearASTM D 4533lb6590MARV
CBR PunctureASTM D 6241lb450600MARV
Water Flow(5)ASTM D 4491gpm/ft2125100MARV
Permittivity(5)ASTM D 4491sec-11.631.26MARV
Permeability(5)ASTM D 4491cm/sec0.300.30MARV
AOSASTM D 4751US Sieve7080MaxARV

Notes:
(1) Transmissivity was measured using water at 21 ± 2 ° C (70 ± 4) ° C with a gradient of 0.1 and a confining pressure of 10,000 psf between steel plates after 15 minutes. Values may vary with individual labs. DS – Double-Sided, SS -Single Sided
(2) Condition 190/2.16
(3) Minimum average value.
(4) MARV is statistically defined as mean minus two standard deviations and it is the value that is exceeded by 97.5% of all the test data.
(5) At the time of manufacturing. Handling may change these properties.