Skaps Industries | Geosynthetic Products & Technical Textiles

SKAPS TRANSNET 270 – GEOCOMPOSITE – METRIC UNITS

TN-160

SKAPS TRANSNETTM Geocomposite consists of SKAPS Geonet made from HDPE resin with nonwoven polypropylene geotextile fabric heat bonded on one side or both sides of Geonet.

PROPERTYTEST METHODUNITVALUEVALUEQUALIFIER
GEONET
ThicknessASTM D 5199mm6.356.35MAV(3)
Carbon BlackASTM D 4218%2.002.00MAV
Tensile StrengthASTM D 7179N/mm9.629.62MAV
Melt FlowASTM D 1238(2)g/10 min1.001.00Maximum
DensityASTM D 1505g/cm30.940.94MAV
Transmissivity(1)ASTM D 4716m2/sec3.0 x 10-33.0 x 10-3MAV
GEOCOMPOSITE200 g/m2270 g/m2
Ply AdhesionASTM D 7005g/cm178178MAV
Transmissivity(1) DSASTM D 4716m2/secTN 270-2-6TN 270-2-8
5.0 x 10-45.0 x 10-4MAV
Transmissivity(1) SSASTM D 4716m2/secTN 270-1-6TN 270-1-8
1.5 X 10-31.5 X 10-3MAV
GEOTEXTILE
Fabric WeightASTM D 5261g/m2200270MARV(4)
Grab TensileASTM D 4632N7111001MARV
Grab ElongationASTM D 4632%5050MARV
Trapezoid TearASTM D 4533N289400MARV
CBR PunctureASTM D 6241N20022670MARV
Water Flow(5)ASTM D 4491l/min/m250934075MARV
Permittivity(5)ASTM D 4491sec-11.631.26MARV
Permeability(5)ASTM D 4491cm/sec0.300.30MARV
AOSASTM D 4751mm0.2120.180MaxARV

Notes:
(1) Transmissivity was measured using water at 21 ± 2 ° C (70 ± 4) ° C with a gradient of 0.1 and a confining pressure of 479 kPa between steel plates after 15 minutes. Values may vary with individual labs. DS – Double-Sided, SS -Single Sided
(2) Condition 190/2.16
(3) Minimum average value.
(4) MARV is statistically defined as mean minus two standard deviations and it is the value that is exceeded by 97.5% of all the test data.
(5) At the time of manufacturing. Handling may change these properties.