SKAPS non-woven geotextiles are needle-punched to provide excellent strength and hydraulic characteristics necessary for ground stabilization, drainage, and erosion control applications. Needle-punched non-woven is manufactured by mechanically orienting and interlocking polypropylene fibers of a carded web. With the combination of drafting and heat, non-woven needle-punched fabrics deliver high-strength products with relatively high elongations that offer high survivability when implemented within a transportation-engineered design.
SKAPS GT-110 Dewatering Bag conforms to the Minimum Average Roll Values (MARV) listed below:
| Property | Method | English (MARV2) | Metric (MARV2) |
| Weight (Typical) | ASTM D 5261 | 10.0 oz./yd2 | 339 g/m2 |
| Grab Tensile Strength | Grab Tensile Strength | 250 lbs. | 1.110 kN |
| Mullen Burst Strength | ASTM D 3786 | 500 psi | 3447 kPa |
| Water Flow4 | ASTM D 4491 | 80 gpm/ft.2 | 3251 l/min/m2 |
| Filter Efficiency | ASTM D 5141 | 80% | 80% |
| UV Resistance | ASTM D 4355 | 70%/500 hrs. | 70%/500 hrs. |
PACKAGING
| Bag Dimensions (W X L) | Bag Dimensions (W X L) |
| 1.5 ft. x 2.5 ft. | 0.46 m x 0.76 m |
| 7.5 ft. x 7.5 ft. | 2.29 m x 2.29 m |
| 10.0 ft. x 15.0 ft. | 3.05 m x 4.57 m |
| 15.0 ft. x 15.0 ft. | 4.57 m x 4.57 m |
Note
- The property values listed above are subject to change without notice.
- Minimum Average Roll Values (MARV) is calculated as the average minus two standard deviations. Statistically, it yields approximately 97.5% degree of confidence that any samples taken from quality assurance testing will meet or exceed the values described above.
- Maximum Average Roll Value (MaxARV)
- At the time of manufacturing. Handling may change these properties.