| GE140 | GE160 | GE170 |
| GE180 | GE110 | GE112 |
| GE114 | GE116 | GE200 |
| GE240 | GE280 | GE320 |
| Comparison Chart – GE Products | Comparison Chart – GE Heavy Weight Products |
SKAPS Industries offers a wide spectrum of products such as geotextiles, geomembranes, and geocomposites for multiple applications in regard to landfills, ponds, and mining design and engineering.
Landfills are highly complex, well-engineered series of cells in or above the ground. Each cell is lined with an advanced liner system which prevents trash migration and contamination of groundwater. SKAPS Geonet, Geocomposite, and Geotextile are the best technical and financial drainage options for landfill Cell and Cap. SKAPS products offer safer solutions to improve the environment as well as increase the capacity of landfill.
Ponds are artificially created for fluid storage systems which are designed commonly using geosynthetic materials. Ponds can be of various types depending upon applications such as; Leachate Ponds, Brine Ponds, Wastewater Ponds, Containment Ponds, Gravity Ponds, Raw Water Storage Pond, Pregnant Solution Ponds, etc.
In Heap Leaching technology for mineral processing (or mining), large piles of mineralized rocks are irrigated with alkaline or acidic solutions to leach the intended mineral. Generally, leach pads are conventional, dumps, valley fills, and dynamic on/off pads.
- Conventional pads are comparatively flat and the ore is stacked in thin layers (Up to 15 meters).
- Dumps are similar to conventional pads but the ore is generally uncrushed and very low grade.
- Valley fills are built in natural valleys with buttress dams at the bottom of a valley or a leveling fill within the valley.
- Dynamic pads are graded to near flat plane since off-loading requires accurate information of the liner system relative to the depth
- The overburden stress on the liner system is the depth of the ore times the density of the ore.
Geocomposite Liner Drainage System
Crushed stone with specific requirements is expensive and not easily available to deliver at the job site. It is not advantageous to place crushed stone directly against the geomembrane. An alternative is necessary which is cost-effective and reduces construction time with ease of availability. SKAPS geocomposite, that is TRANSNET geonet bonded to one side or both sides with nonwoven needle-punched geotextiles. TRANSNET geonet made with high-density polyethylene does not crush under the high normal pressure of ore in heap leach pads. The geotextile act as a filler media and helps the smooth, uninterrupted flow. The installation is faster than laying crushed stone and damage to the geomembrane is minimum compared to the crushed stone layer.
SKAPS Geotextiles in Mining Application
In the Heap leaching operation mined ore is usually crushed into small chunks and heaped on a geomembrane and/or clay-lined leach pad, where it can be irrigated with a leach solution to dissolve the valuable metals. The crushed ore containing gold is irrigated with a dilute alkaline cyanide solution. Sulfuric acid is used to dissolve copper, nickel, and uranium from its ores. So aggressive liquids are used in this process and the geosynthetic materials used in this application have to be chemically resistant across a wide pH range.
A geomembrane liner beneath heap leach stacks provides a primary containment barrier for leach solutions with proper liner selection and installation. Underlying the geomembrane there is a fine-grained bedding fill to protect the overlying geomembrane liner from subgrade rock puncture. This layer is not readily available and SKAPS non-woven geotextiles offer a great economical, factory-manufactured solution to the problem. SKAPS non-woven geotextiles can be used directly underneath the geomembrane for cushion purposes.
The pregnant solution is collected and transported out of the heap mine using a network of collection pipes. The solution collection pipes’ survivability and long-term flow capacity is often engineering design problem. SKAPS non-woven geotextiles can be incorporated in the design for filtration function and offer a superior solution in comparison to just having gravel in a collection sump or a collection trench.
Cost Comparison
The crushed stone layer costs are about one-third of the total cost of the liner system and crushed stone costs have been escalating at a significantly higher rate than other construction costs. The gravel is also a problem with cost overruns and project delays. The SKAPS Geocomposite can be used instead of the gravel layer partially or completely at a lower cost. It also provides cushion and protects the liner from damage and helps to minimize punctures of the geomembrane.
Performance
The SKAPS geocomposite can withstand higher compressive loads, which makes it appropriate to use as a drainage and protection layer under higher loads of large heap leach pads. The SKAPS geocomposite provides better in-plane flow capacity to transport leaching solutions under very high overburden loads.
Please contact us for in-plane flow capacity under specific project requirements.