SKAPS non-woven geotextiles are needle-punched to provide excellent strength and hydraulic characteristics necessary for ground stabilization, drainage, and erosion control applications. Needle-punched non-woven is manufactured by mechanically orienting and interlocking polypropylene fibers of a carded web. With the combination of drafting and heat, non-woven needle-punched fabrics deliver high-strength products with relatively high elongations that offer high survivability when implemented within a transportation-engineered design.
SKAPS GT-110 Dewatering Bag conforms to the Minimum Average Roll Values (MARV) listed below:
Property
Method
English (MARV2)
Metric (MARV2)
Weight (Typical)
ASTM D 5261
10.0 oz./yd2
339 g/m2
Grab Tensile Strength
Grab Tensile Strength
250 lbs.
1.110 kN
Mullen Burst Strength
ASTM D 3786
500 psi
3447 kPa
Water Flow4
ASTM D 4491
80 gpm/ft.2
3251 l/min/m2
Filter Efficiency
ASTM D 5141
80%
80%
UV Resistance
ASTM D 4355
70%/500 hrs.
70%/500 hrs.
PACKAGING
Bag Dimensions (W X L)
Bag Dimensions (W X L)
1.5 ft. x 2.5 ft.
0.46 m x 0.76 m
7.5 ft. x 7.5 ft.
2.29 m x 2.29 m
10.0 ft. x 15.0 ft.
3.05 m x 4.57 m
15.0 ft. x 15.0 ft.
4.57 m x 4.57 m
Note
The property values listed above are subject to change without notice.
Minimum Average Roll Values (MARV) is calculated as the average minus two standard deviations. Statistically, it yields approximately 97.5% degree of confidence that any samples taken from quality assurance testing will meet or exceed the values described above.
Maximum Average Roll Value (MaxARV)
At the time of manufacturing. Handling may change these properties.
