SKAPS TRANSNETTM geonet consists of SKAPS Geonet made from HDPE resin.
| PROPERTY | TEST METHOD | UNIT | VALUE | QUALIFIER |
| Thickness | ASTM D 5199 | mil | 300 | MAV(3) |
| Carbon Black | ASTM D 4218 | % | 2.0 | MAV |
| Tensile Strength | ASTM D 7179 | lb/in | 75 | MAV |
| Melt Flow | ASTM D 1238(2) | g/10 min | 1.0 | Maximum |
| Density | ASTM D 1505 | g/cm3 | 0.94 | MAV |
| Transmissivity(1) | ASTM D 4716 | gal/min/ft (m2/sec) | 38.67 (8.0 x 10-3) | MAV |
Notes:
(1) Transmissivity measured using water at 21 ± 2 ° C (70 ± 4) ° C with a gradient of 0.1 and a confining pressure of 10,000 psf between steel plates after 15 minutes. Values may vary with individual labs.
(2) Condition 190/2.16
(3) Minimum average value